1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

2010 TXC250 Valve Shim Question

Discussion in '4 Stroke' started by longw8, Feb 26, 2017.

  1. longw8 Husqvarna
    AA Class

    Location:
    Brookfield Wisconsin
    Husqvarna Motorcycle:
    2008 510SMR, 2012 250TXC
    Other Motorcycles:
    08 250SXF, 07 CRF250, 01 CR250,
    I was checking the valve clearance today. First time Ive checked them since I owned the bike.

    Intakes look good .15mm & .12mm (should be .15mm?)

    Exhaust gap was larger than spec... .25mm and .30mm ( should be .20mm?)

    Is it odd for the gap to get larger then spec? I thought the valve gaps usually close up.

    Is .20mm the correct gap for the exhaust?
    longw8, Feb 26, 2017
    #1