• 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

2010 te 250 12 tooth front sproket wearing how many km/miles

husky bom

husky bom

Husqvarna
A Class
hay just after a bit of info on the 12 tooth front sproket that you guys are running on your 2010 250's ..........how many km/miles do you get out of it before you have to replace it .........i have done 1100km or 680miles and have needed to replace it is this normall ?????????????

thanks
H.B
 
For a 12 t bout right depending on type of mud dirt ect. Small sprockets wear much faster because teeth get more contact more often also chain is subject to more and greater rub.
Later george
 
I'd say 680 miles is good. You must keep a good eye on your chain, guides & other sprocket & clean them often. I change out the front several times & then the rear & chain when the wear increases.
 
You must log in or register to reply here.
Back
Top