1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    TE = 4st Enduro & TC = 4st Cross

2009 TE310 - Brake Rebuilt kits

Discussion in '4 Stroke' started by hhdwtmtw, Feb 3, 2016.

  1. hhdwtmtw He who dies with the most toys wins...

    Location:
    Melbourne, Australia
    Husqvarna Motorcycle:
    '14 TE300, '11 TE449, '10 TE250
    Other Motorcycles:
    Royal Enfield Continental GT 650
    I'm looking for a front brake master cylinder, front brake caliper and rear brake caliper rebuild kits (pistons, seals and boots). OEM are way too expensive and not in stock.

    AllBallsRacing have started to release brake rebuild kits but they only start with MY2014 and later for Husky.

    Does anyone know of another source that is reasonably priced and in stock?
  2. Andrew Pope Husqvarna

    Husqvarna Motorcycle:
    Te450 08
    Other Motorcycles:
    Xr250 1990 wr250 07
    Bumping this as I’m hoping someone has found a source in the last 2.5 years. Looking for rear brake master rebuild for an 08 te450.
  3. Andrew Pope Husqvarna

    Husqvarna Motorcycle:
    Te450 08
    Other Motorcycles:
    Xr250 1990 wr250 07
    After lots of resurch I purchased a rebuild kit suited to a Ktm 2004-2014. Time will tell if it works. Part numbers and sizes seem to match. Made by all balls.
  4. hhdwtmtw He who dies with the most toys wins...

    Location:
    Melbourne, Australia
    Husqvarna Motorcycle:
    '14 TE300, '11 TE449, '10 TE250
    Other Motorcycles:
    Royal Enfield Continental GT 650
    Hi Andrew,
    I've since sold the TE310. Maybe email All Balls Racing and see if they can help.
    Have you tried genuine?
    Cheers,
    Phil
  5. Andrew Pope Husqvarna

    Husqvarna Motorcycle:
    Te450 08
    Other Motorcycles:
    Xr250 1990 wr250 07
    It fit fine. Nice when it all works out and was real easy to do. I don’t know my husky models that well but anyone in the future this ktm part and repair kit is the same for 2004 to 2014 ktm and 2006 to 2012 husky with Brambo brakes.I would also assume it would be the same for the calipers, about to find this out as well.
    I also believe from my investigation that the masters or pumps are interchangeable between 2006 to 2012 husky and the 2013 to 2017, but the rebuild kits may be different. This I am not convinced about and someone else may be able to help here.
    Also moose racing does kits for this Brambo brakes.
  6. Trenchcoat85 Husqvarna
    Pro Class

    Location:
    Northern NorCal
    Husqvarna Motorcycle:
    '14 TE 310R
    Other Motorcycles:
    '85 shovel, '75 DT400, '97 XR400
    got a part # and pic? sure does help.