2009 TE 250 no power to fuel pump or spark

Any help much appreciated.
My husky has lost power to the fuel pump and no spark.
Engine turns over and fuel pump primes when I bypass the fuel pump power feed cable.
I've checked all connectors, replaced the 3 fuses and swapped the relays.
All I get when switching on is a a couple of clicks from the relay and a fail on the LCD display.
Many thanks

Replace all fuses under the seat with automotive fuses.

Check the main power wire for the coil, fuel pump, fuel injector. Check your wiring diagram, mine is the green with red stripe wire, yours may be different.

Can it be the fall plug under de buddyseat? When its broken the bike wont run.

TE bikes had the fall over plug dead-ended (non-functional), I've never had a problem with mine.

I had one time that probleme with a 2008te, the wire in the dead-end plug was broken.

Thanks, will try to check this weekend. I have bought a cheap replacement fuel pump so will try that also.

Found the problem! a snapped wire going into the fuel pump relay. Any suggestions of how to fix this as it doesn't look as if you can remove the electrode from the white plastic housing? Thanks

Turned out to be snapped wire in the terminal block that connects to the fuel pump relay. I only saw it when with head torch as connectors filled with mud!