• 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

125-200cc 1999 WR125 exhaust pipe options

O

old3

Husqvarna
AA Class
I searched and checked the cross parts list in the sticky, no luck. Will later model expansion chambers or a PC or FMF bolt up to a 99 WR125?

Not interested in more power yet, just for when this one gets crushed, it is perfect for now.

Thank you. Jim
 
old3 said:
I searched and checked the cross parts list in the sticky, no luck. Will later model expansion chambers or a PC or FMF bolt up to a 99 WR125?

Not interested in more power yet, just for when this one gets crushed, it is perfect for now.

Thank you. Jim Hi Jim been on a pipe hunt myself lately here what i can tell you pro circuits website shows a platinum 2 99-04 not in stock possibly NLA SOOO if 99-04 are the same you have a wide selection scalivini;doma;hgs;dep all claim too offer one fmf has the fatty & dyno port has two as well as a silencer & silencer S/A i gotta tell ya i have two bikes with dynoports on them & i hafta say they are top shelf both have 20 years of beatin around the ozark mountains on them & the one on the 292kawi got it;s first little dent 2 weeks ago i;d say GOOD STUFF call Rich @315 255 3665
Click to expand...
 
Appreciate the lead Troy! Thank you.

Here's a related question, will a later model cylinder bolt on the 99 engine, I'm assuming there might be a difference in the header flange? We have a 99 KTM 125 that has that problem but a later, modern cylinder is a bolt on for the new flange so later pipes will fit it.
 
Husqvarna CR125 08 09 MHQ125C002.jpg
old3 said:
I searched and checked the cross parts list in the sticky, no luck. Will later model expansion chambers or a PC or FMF bolt up to a 99 WR125?

Not interested in more power yet, just for when this one gets crushed, it is perfect for now.

Thank you. Jim
Click to expand...

We have a pipe for your bike. Scalvini. I dont recall part number off hand but 100% sure we have it.
 
You must log in or register to reply here.
Back
Top