Wanted 1993 Husky 350 4 stroke cylinder and piston kit or even a new slevee kit , Thanks Ron Nehls Phone # 1-509-930-0886 email ronnehls@wabroadband.com
no such thing as a {sleeve kit} for any Husky 4 strokes, they are nickasill plated. you have to send your cycl, with a new piston and have it replated. i use a guy here in Colorado, cost me around 200.00 to have it redone.. Wossner makes a nice high comp piston for the 350 for about 175.00 check with Dan at Motoxotica id bet he can get one for you...just make sure they supplie a non coated wrist pin..or you will be back inside it again.
heres your piston http://wossneronline.com/forged_pis...roduct_info&cPath=50_52_63_96&products_id=461
you should have the head done as well, new cam chain, and a gasket kit. cam chain is about 50.00 from Husky. gasket kit about 25.00 DONT REUSE THE OLD GASKETS. valve seals and guides about 40.00 for the set. while your in the head, remove the flashing lines, dont high polish them...youll be sorry.
gday fellas, i am trying to get some parts for a 93 mod te 350 also, have sent a emial to motoxotica and have not got any reply? just wondering if they are eever present on this forum? i will try sending another email maybe it did not get trough... i am after a pistin kit, a conrod kit, a full gasket kit ,a timing chain and some other bits and peices... cheers for ya help.. batesy in aus.