1980 wr 390

Does anyone lnow where I can get my hands on a flywheel puller for a 1980 WR-390. I want to tear this engine down and get it ready for vintage enduro in 2009. I am also looking for a swingarm for this bike since the previous owner of the bike allowed the chain to saw through the bottom of the exsisting one.

Thanks for the replies.

Mike

Either can be had from John at Vintage Husky or the flywheel puller from Husqvarna-Parts.com

Will be traveling in Missouri next week. I know that there is a motorcycle junk yard out there and I thought I saw a frame and swing arm there.

If interested, I can stop, get their number and serial number from frame?

Typpyt!

Thanks for the info on the pullers. Typpyt that would be great just shoot me an email with the information.

Mike

Will do some digging in the wreckage next week when I am out there.

Neat place to go through!

Will get see what I can find!

OldMX,

Stopped by the cycle salvage yard today and out of two Husky swingarms, I think I found one. The first one had the kickstand bracket pulled out once, someone welded it, and cracked again. Then dug through the snowy pile some more and found another one (last one). Excellent shape, needs a paint job and some new bearings in the tubes where it goes through the frame to pivot. It is off of a 250 but I think it will also fits yours.

I would suggest that you contact Louie @ www.50highwaycycle.com or by telephone @ 816-405-2003. Louie said they would take $75 for it but might be able to get them down? I told him to put it back where he knew where it was and someone would call him direct. You might want to have them e-mail you a picture of it and also the measurements, to ensure fit. In case if it doesn't match up, he said might be able to locate one for you!

Let me know how you make out!

Typpyt