1. Husqvarna Motorcycles Made In Sweden - About 1988 and older

1979 Seals Information

Discussion in 'Vintage/Left Kickers' started by hilz129, Mar 9, 2009.

  1. hilz129 Husqvarna
    AA Class

    I have a 79 250WR and thought I would share the seal dimensions that I have for the bike. If these don't seem correct please chime in. Does anyone here have a online supplier they use for such industry standard parts? I have used bearingsdirect.com for wheel bearings, would like to find something similar for seals.


    Fork Seal 35x47x7

    Wheel Seal 25x42x7

    Ignition Seal 25x35x7

    Counter Shaft Seal 25x35x7

    Shifter Seal 17x28x6

    Kick Starter Seal 17x28x6

    Clutch Actuator 10x22x7

    Main Seal 30x52x7
  2. Picklito Husqvarna
    Pro Class

    Location:
    Washington
    Husqvarna Motorcycle:
    430, 430, 430, ,400, 175
    Other Motorcycles:
    KTM250xc, KTM500mx, KTM440exc
    Nice list! Thank you very much.
    I've used Applied Industrial Technologies here locally for bearings and seals.

    Fork seal comment: KTM 65SX uses a 35x47 fork seal, but in a 10.5mm width. There's also a dust scraper. There should be plenty of room in our Husky 35's for these parts. I just ordered a set (K&S) to use on my 81 430 WR's 35mm forks. I'll post back how well they fit. Might be another option for us.