1. 4 Stroke Husqvarna Motorcycles Made In Austria - About 2014 & Newer
    FE = 4st Enduro & FC = 4st Cross

FE/FC 17' FX 350 stock exhaust?

Discussion in '4st' started by covi, May 6, 2017.

  1. covi Husqvarna
    AA Class

    Location:
    Vermont
    Husqvarna Motorcycle:
    350 FX
    Is it a spark arrester or baffle that I see when looking into the end on my exhaust? My 15' didn't have this. It prevents me from using an exhaust plug. Can it be removed? Should it be removed? Any advice would be great. IMG_1075.JPG
  2. sl00thy Husqvarna
    C Class

    Location:
    St. Clair Shores, Mi
    Husqvarna Motorcycle:
    15 fc450 / 17 fx350 / 14 350xc-f
    Other Motorcycles:
    2011 bmw r1200rt / 73 bmw r75
    baffle - fx's dont come with spark arrestors
    covi likes this.
  3. covi Husqvarna
    AA Class

    Location:
    Vermont
    Husqvarna Motorcycle:
    350 FX
    Should I remove it?
  4. sl00thy Husqvarna
    C Class

    Location:
    St. Clair Shores, Mi
    Husqvarna Motorcycle:
    15 fc450 / 17 fx350 / 14 350xc-f
    Other Motorcycles:
    2011 bmw r1200rt / 73 bmw r75
    not sure what it for. what about modifying your exhaust plug
    covi likes this.
  5. Up-tite Husqvarna
    Pro Class

    If eco freak leave it in.
    Want some power and better tone remove it.
    Later George
  6. covi Husqvarna
    AA Class

    Location:
    Vermont
    Husqvarna Motorcycle:
    350 FX
    Way better now. IMG_1214.JPG
    sl00thy likes this.
  7. scratchpad Husqvarna
    A Class

    Husqvarna Motorcycle:
    13' TXC310R


    Will the bike require a JD tuner, Vortex ecu or other if the oem slip on is removed?
  8. covi Husqvarna
    AA Class

    Location:
    Vermont
    Husqvarna Motorcycle:
    350 FX
    No the bike needed nothing after the new exhaust was installed. It runs awesome. I suppose if you wanted to you could return it but, again they say it's a direct replacement for oem. I have a ton of after market accessories and the akropvic is by far the best addition.


  9. scratchpad Husqvarna
    A Class

    Husqvarna Motorcycle:
    13' TXC310R
    right on! We have to run a spark arrestor here in California so it looks like my only option at this point is to get a slip on. Didn't want to run a slip on by itself if it would create too lean of a condition.
  10. Huskynoobee CH Sponsor ZipTy Racing

    Location:
    Castaic, CA
    Husqvarna Motorcycle:
    2011 TE449 2006 WR250
    Other Motorcycles:
    HDUltra Classic IT200 YZ250 SV650s
    I think that since it's a Red Sticker bike, it's likely to be made to run well. It's the FE that requires a lot of work to unscrew.
  11. covi Husqvarna
    AA Class

    Location:
    Vermont
    Husqvarna Motorcycle:
    350 FX
    Yes, the FE would need / like some mods to get it going. FC/FX is basic plug and play. Old pipe off and new on in 20min.