1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    WR = 2st Enduro & CR = 2st Cross

125-200cc 144 rings

Discussion in '2 Stroke' started by razornpc, Aug 24, 2009.

  1. razornpc Husqvarna
    AA Class

    Location:
    iowa
    how often are you guy ringing your 144s? i did a top end(piston, bearing, ring and gaskets/o-rings) in mine in may. raced it a bunch and play rode it a bunch too.

    also does anyone esle besides wiesco make a 144 piston?
  2. dubbs Husqvarna
    A Class

    Location:
    Ontario
    I'm interested in the same thing. My 125 could have gone a while longer but the cylinder walls are thinner on the 144.
  3. razornpc Husqvarna
    AA Class

    Location:
    iowa
    else, i spelled else wrong.

    spelled it "ESLE", not to be confused with "ISLE". i was meaning to type else and my fingers just landed on the right keys, just in the wrong order.

    huh, what do you know.
  4. razornpc Husqvarna
    AA Class

    Location:
    iowa
    well it looks like im the 1st person to put a ring in a 144.

    it was epic guys!
  5. dubbs Husqvarna
    A Class

    Location:
    Ontario
    How long did that take you? An hour for everything?
  6. BlueHusky144 Husqvarna
    AA Class

    Location:
    Staunton, IL
    I did not ring my 144 any sooner than my 125. I could tell by compression when it needed it.

    It would be nice if Husky offered a kit that included a coated 144 piston. I find the wiseco very soft and it just doesn't last as long as the coated 125 piston. But for the ring itself just go by compression or performance.