1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    WR = 2st Enduro & CR = 2st Cross

125-200cc 04 Bodywork swap

Discussion in '2 Stroke' started by robj, Oct 7, 2020.

  1. robj Husqvarna
    AA Class

    Location:
    NZ
    Husqvarna Motorcycle:
    2001 CR125
    Other Motorcycles:
    KX/KDX200 hybrid
    Hey bit of a blast from the past, but do you know if the 04 CR125 tank, seat and plastics would bolt straight onto an 08 CR125? I have found a low hour 08 and would like to convert to the ergos of the 00-04. Thanks
  2. robj Husqvarna
    AA Class

    Location:
    NZ
    Husqvarna Motorcycle:
    2001 CR125
    Other Motorcycles:
    KX/KDX200 hybrid
    Ok, I'll take a punt on it.
  3. rancher1 Husqvarna
    Pro Class

    Location:
    WA
    People switched the 05 to 08 plastic to the 04 models so it should work the other direction.
    robj likes this.
  4. Sonnie Mee Husqvarna
    A Class

    Location:
    England
    Husqvarna Motorcycle:
    Team Motorex Husqvarna CR125
    The tank side panels and rad shrouds should fit but I am not sure if the rear fender or side plates will fit I think the sub frame is slightly different you might have to change the rear subframe, seat, rear fender and side panels
    robj likes this.